March Weather in Plast, Russian Federation

Last updated: August 27, 2025

In Plast, Russian Federation, the average temperature in March hovers around -6°C (22°F). Expect conditions to range from a brisk -29°C (-21°F) at their coldest to a mild 13°C (55°F) at their warmest. During this period, precipitation accumulates to about 28 mm (1.1 in) over 6 days, and the air carries a notable average humidity of 96%. Be prepared for a chilly and damp month!

March Temperature in Plast

In March in Plast, the average temperature is -6°C (22°F). Maximums can reach 13°C (55°F) and minimums can be as low as -29°C (-21°F). Travelers should be prepared for a wide range of temperatures and pack accordingly to enjoy their visit.

March Weather in Plast: Daily Temperature Highs, Lows, and Averages

The chart illustrates March temperature patterns in Plast, showcasing daily minimum, maximum, and average temperatures. It highlights the typical range of temperatures throughout the month, providing insights into weather trends. In Plast, March typically has an average temperature of -6°C (22°F), with highs reaching up to 13°C (55°F) and lows dropping to around -29°C (-21°F).

Data source: Temperature data for Plast generated using information from the Copernicus Climate Change Service.

March Precipitation in Plast

In Plast in March, the precipitation amount is 28 mm (1.1 in) over the course of 6 days.

March Precipitation Trends in Plast

The chart displays monthly precipitation patterns in Plast, with values for each month alongside March’s data, which is highlighted for easy comparison. It shows the amount of precipitation, providing insights into how March’s conditions compare to those of other months. In Plast, March typically receives around 28 mm (1.1 inches) of precipitation spread over approximately 6 days.

Data source: Precipitation data for March generated using information from the Copernicus Climate Change Service.

Choose your preferred precipitation unit

Millimeters (mm) Inches (in)

March Humidity in Plast

In Plast in March, humidity is 96%. With an average temperature of -6°C (22°F), this humidity feels like a freezing mist that clings to your skin, making traveling uncomfortable as you brace against the chill while the damp air seeps into your clothes.

March Average Humidity in Plast

This chart illustrates the average monthly humidity levels in Plast, with March’s data highlighted for easy comparison. It shows the fluctuation in humidity throughout the year, helping you understand how conditions vary by season. In March, average humidity in Plast is approximately 96%, offering insight into how humid the weather typically is during this month.

Data source: Humidity data for March generated using information from the Copernicus Climate Change Service.

March UV Index in Plast

In Plast in March, the maximum UV index reaches 4, which corresponds to a moderate Exposure Category. With a time to burn of 30 minutes, it’s important to take precautions to protect your skin. You can find more details in the Hourly UV Index in Plast for better planning.

Maximum UV Index Levels in Plast for March

The chart shows the monthly maximum UV Index (UVI) for Plast in March, representing the highest UV radiation level. The UVI measures the intensity of ultraviolet radiation from the sun, indicating the potential risk of sunburn and UV-related health issues. In March, the maximum UV index in Plast typically reaches 4, which falls under the moderate exposure category.

Data source: Plast March UVI data generated using information from the Copernicus Climate Change Service.

UV Risk Categories

Extreme (11+): Avoid the sun, stay in shade.
Very High (8-10): Limit sun exposure.
High (6-7): Use SPF 30+ and protective clothing.
Moderate (3-5): Midday shade recommended.
Low (0-2): No protection needed.

How March Weather in Plast Compares to Other Months

Weather in Plast varies notably across the year, with each month offering distinct climate conditions. This page compares March’s weather to other months in Plast, focusing on differences in temperature, rainfall, humidity, and UV levels.

This table compares monthly weather conditions in Plast, showing how March’s temperature, precipitation, humidity, and UV index levels differ from those of other months.
	Temperature	Precipitation	Humidity	UV
January Weather	-14°C (7°F)	17 mm (0.7 inches)	98%	low
February Weather	-12°C (10°F)	26 mm (1.0 inches)	97%	low
March Weather	-6°C (22°F)	28 mm (1.1 inches)	96%	moderate
April Weather	6°C (43°F)	29 mm (1.1 inches)	90%	moderate
May Weather	14°C (58°F)	30 mm (1.2 inches)	71%	high
June Weather	17°C (64°F)	32 mm (1.3 inches)	65%	high
July Weather	21°C (70°F)	68 mm (2.7 inches)	73%	high
August Weather	19°C (66°F)	46 mm (1.8 inches)	72%	high
September Weather	11°C (52°F)	40 mm (1.6 inches)	82%	moderate
October Weather	5°C (41°F)	35 mm (1.4 inches)	88%	moderate
November Weather	-4°C (25°F)	20 mm (0.8 inches)	92%	low
December Weather	-11°C (12°F)	23 mm (0.9 inches)	90%	low