nomadseason

May Weather in Tanlacut (Labor Zapata), Mexico

Last updated: August 27, 2025

In May, the average temperature in Tanlacut (Labor Zapata), Mexico is a warm 26°C (80°F). Expect a range of temperatures, with minimums dipping to 14°C (57°F) and maximums soaring up to 41°C (106°F). Be prepared for some rain, as 110 mm (4.3 in) of precipitation is anticipated over 19 days. With an average humidity of 82%, it’s advisable to stay hydrated while enjoying the balmy weather!

May Temperature in Tanlacut (Labor Zapata)

In May in Tanlacut (Labor Zapata), the average temperature is 26°C (80°F). Maximum temperatures can reach 41°C (106°F), while minimums can drop as low as 14°C (57°F). This wide range of temperatures makes Tanlacut (Labor Zapata) a suitable destination for travelers seeking both warm days and cooler evenings.

May Weather in Tanlacut (Labor Zapata): Daily Temperature Highs, Lows, and Averages

The chart illustrates May temperature patterns in Tanlacut (Labor Zapata), showcasing daily minimum, maximum, and average temperatures. It highlights the typical range of temperatures throughout the month, providing insights into weather trends. In Tanlacut (Labor Zapata), May typically has an average temperature of 26°C (80°F), with highs reaching up to 41°C (106°F) and lows dropping to around 14°C (57°F).
JanFebMarAprMayJunJulAugSepOctNovDec636671768080798078746864
Data source: Temperature data for Tanlacut (Labor Zapata) generated using information from the Copernicus Climate Change Service.
Choose your preferred temperature unit
The average of daily temperatures (24 hours) calculated across all days in the month.

May Precipitation in Tanlacut (Labor Zapata)

In Tanlacut (Labor Zapata) in May, the precipitation amount is 110 mm (4.3 in) over a span of 19 days.

May Precipitation Trends in Tanlacut (Labor Zapata)

The chart displays monthly precipitation patterns in Tanlacut (Labor Zapata), with values for each month alongside May’s data, which is highlighted for easy comparison. It shows the amount of precipitation, providing insights into how May’s conditions compare to those of other months. In Tanlacut (Labor Zapata), May typically receives around 110 mm (4.3 inches) of precipitation spread over approximately 19 days.
JanFebMarAprMayJunJulAugSepOctNovDec524763621111561321071742125231
Data source: Precipitation data for May generated using information from the Copernicus Climate Change Service.
Choose your preferred precipitation unit

May Humidity in Tanlacut (Labor Zapata)

In Tanlacut (Labor Zapata) in May, humidity is 82%. With an average temperature of 26°C (80°F), this humidity feels like a heavy, warm blanket wrapping around you, making outdoor activities feel more exhausting and sweaty, which can be quite challenging for traveling.

May Average Humidity in Tanlacut (Labor Zapata)

This chart illustrates the average monthly humidity levels in Tanlacut (Labor Zapata), with May’s data highlighted for easy comparison. It shows the fluctuation in humidity throughout the year, helping you understand how conditions vary by season. In May, average humidity in Tanlacut (Labor Zapata) is approximately 82%, offering insight into how humid the weather typically is during this month.
JanFebMarAprMayJunJulAugSepOctNovDec89%86%83%80%82%79%72%74%84%92%91%91%
Data source: Humidity data for May generated using information from the Copernicus Climate Change Service.

May UV Index in Tanlacut (Labor Zapata)

In Tanlacut (Labor Zapata) in May, the maximum UV index is 12, which corresponds to an extreme Exposure Category. The time to burn is just 10 minutes, underscoring the importance of sun protection. For detailed information, you can check the Hourly UV Index in Tanlacut (Labor Zapata).

Maximum UV Index Levels in Tanlacut (Labor Zapata) for May

The chart shows the monthly maximum UV Index (UVI) for Tanlacut (Labor Zapata) in May, representing the highest UV radiation level. The UVI measures the intensity of ultraviolet radiation from the sun, indicating the potential risk of sunburn and UV-related health issues. In May, the maximum UV index in Tanlacut (Labor Zapata) typically reaches 12, which falls under the extreme exposure category.
JanFebMarAprMayJunJulAugSepOctNovDec710121312131313121187
Data source: Tanlacut (Labor Zapata) May UVI data generated using information from the Copernicus Climate Change Service.

UV Risk Categories

  •  Extreme (11+): Avoid the sun, stay in shade.
  •  Very High (8-10): Limit sun exposure.
  •  High (6-7): Use SPF 30+ and protective clothing.
  •  Moderate (3-5): Midday shade recommended.
  •  Low (0-2): No protection needed.

How May Weather in Tanlacut (Labor Zapata) Compares to Other Months

Weather in Tanlacut (Labor Zapata) varies notably across the year, with each month offering distinct climate conditions. This page compares May’s weather to other months in Tanlacut (Labor Zapata), focusing on differences in temperature, rainfall, humidity, and UV levels.

This table compares monthly weather conditions in Tanlacut (Labor Zapata), showing how May’s temperature, precipitation, humidity, and UV index levels differ from those of other months.
 TemperaturePrecipitationHumidityUV
January Weather17°C (63°F)52 mm (2.0 inches)88%high
February Weather19°C (66°F)47 mm (1.8 inches)86%very high
March Weather21°C (71°F)63 mm (2.5 inches)83%extreme
April Weather25°C (77°F)62 mm (2.4 inches)80%extreme
May Weather26°C (80°F)110 mm (4.3 inches)82%extreme
June Weather26°C (80°F)156 mm (6.1 inches)79%extreme
July Weather26°C (80°F)132 mm (5.2 inches)72%extreme
August Weather27°C (80°F)107 mm (4.2 inches)74%extreme
September Weather26°C (78°F)174 mm (6.8 inches)84%extreme
October Weather23°C (74°F)212 mm (8.3 inches)92%extreme
November Weather20°C (69°F)52 mm (2.0 inches)91%very high
December Weather18°C (64°F)31 mm (1.2 inches)91%high

Compare Tanlacut (Labor Zapata)'s Climate with Cities Worldwide